Give your Intex pool it’s best performance by using genuine Intex brand, easy to clean, Dacron material filter cartridges. Built for Intex filter pumps and Krystal Klear systems, these cartridges will keep your pool water sparkling and clean for swimmers. These Type A Filter Cartridges need to be replaced as often as every two weeks, so make sure you have plenty on hand to keep you pool water safe and ready for swimmers all season long!

For the 500, 530, 800, 1000 & 1500 gal/hr filter pumps models 28603EG, 58603EG, 58604E, 28635EG, 56635EG, 56636E, 56637E, 56638E & 58623, & Intex filter pumps or “Krystal ClearTM” filter pumps models 02 & 12R

Product Features

• Genuine Intex Type A filter cartridges
• Shipping Weight: 4 LBS
• Product Dimensions: 8″H x 4.25″W
• Easy to Clean
• This filter also works for Summer Escapes type C filters

[ccw-atrib-link]

Perflex filters are performance matched with the Power-Flo Matrix pump series to ensure a system that maximizes its filtration ability. These advanced filtration systems are designed to operate with less resistance than conventional units, thus producing more filtered water with less pump horsepower. The Perflex filter features: pump-to-filter union connection provides simple installation and winterization, is corrosion-proof, has an ABS modular platform base accepts optional chlorine feeder and optional microprocessor pump timer.

Product Features

• Pump-to-filter union connection provides simple installation and winterization
• Corrosion-proof, modular platform base accepts optional chlorine feeder

[ccw-atrib-link]

The Baracuda G3 will thoroughly clean your inground pool floor and walls to automatically remove dirt, debris, bugs, twigs, leaves, sand and even pebbles. The G3 has only one operational moving part-the Long-Life Diaphragm. No gears, wheels, or flappers means simple operation, maximum power, and low-cost maintenance. It’s compact and self-adjusting flow control valve automatically regulates water flow, ensuring peak performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch.

Product Features

• Quiet, powerful suction cleaner; works with low-speed pumps for maximum efficiency.
• Devours small and medium-sized debris and cleans floor, walls and steps of your entire pool.
• FlowKeeper Valve automatically regulates water flow to maintain peak cleaning performance even with lower horsepower pumps.
• Wheel Deflector for movement around tight corners.
• Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
• 36-Fin Disc increases adhesion to pool surface and avoids getting hung-up on lights, drains covers, fittings and other pool features.
• Durable Long-Life Diaphragm with reliable, one-moving-part-technology
• Patented Quick-Release Cassette provides simplified routine maintenance.
• Easy installation

[ccw-atrib-link]

The Hayward Super Pump large-capacity, technologically advanced pump blends cost-efficient design with durable construction, setting the standard for excellence and value. Designed for in ground pools and spas of all types and sizes, the Super Pump features a totally balanced, efficient Noryl impeller to produce higher flow rates at less horsepower than other pumps, so you can run your pump less and save on electricity. Super-sized 110 cubic-inch basket has extra leaf-holding capacity and extends time between cleanings. Rigid construction with load extender ribbing assures free flowing operation for heavy debris loads. Exclusive swing-aside hand knobs make strainer cover removal simple and easy. Lexan see-thru strainer cover lets you see when the basket needs cleaning. All components molded of corrosion-proof PermaGlass XL for extra durability and long life.

This large capacity pool pump combines durable corrosion-proof construction with state-of-the-art performance for years of trouble-free service. It easily installs on existing in-ground pool systems with a unique, stable mounting base for additional versatility. Rugged, one-piece housing, with full-flow ports, assures rapid priming and continuous operation. Service-ease design gives simple access to all internal parts. Motor and entire drive group assembly can be removed, without disturbing pipe or mounting connections, by disengaging just four bolts. Super Pump combines proven performance with quiet, efficient and dependable operation.

Efficient, dependable circulation pump for in-ground pools of all types and sizes. view larger Diagram. view larger Super-size 110-cubic-inch basket has extra leaf-holding capacity and extends time between cleanings. view larger

Hayward Super Pump

Efficient. Dependable. Proven. The Super Pump has all the quality features you expect from Hayward. Designed for in-ground pools and spas of all types and sizes, Super Pump features a large see-through strainer cover, a super-size debris basket, and an exclusive service-ease design for extra convenience. Super Pump combines proven performance with quiet, efficient and dependable operation.

Highlights

Heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation Exclusive swing-away hand knobs for easier strainer cover removal: no tools required, no loose parts, no clamps See-through strainer cover lets you see when the basket needs to be cleaned and eliminated guesswork; special self-adjusting seal ensures dependable sealing 110-cubic-inch basket has extra leaf-holding capacity; load-extender ribbing ensures free-flowing operation Service-ease design gives simple access to all internal parts Self-priming (suction lift up to 10-feet above water level) Heat-resistant, industrial-size ceramic seal is long-wearing and drip proof Mounting base provides stable, stress-free support, plus versatility for any installation requirement; adapts 48- and 56-frame motors

Performance Data

Max Rated Model No. Pump Output (GPM) vs. Total Resistance to Flow (Feet of Head) 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft SP2600X5 48 38 23 — — — SP2605X7 61 52 41 25 — — SP2607X10 74 65 54 40 9 — SP2610X15 83 75 65 53 36 — SP2615X20 122 111 98 84 66 38 SP2621X25 117 107 97 86 74 58

Performance Data – Low Speed

Max Rated Model No. Pump Output (GPM) vs. Total Resistance to Flow (Feet of Head) 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft SP2607X102S 39 29 13 — — — SP2610X152S 41 32 18 — — — SP2615X202S 63 51 35 — — —

General FAQ’s for All Hayward Pumps

How does my in-ground Pump operate? Hayward in-ground pumps are self-priming centrifugal pumps. These pumps have a vacuum chamber, commonly known as a pump housing. The pump housing must be filled with water in order to create a vacuum, resulting in the pump drawing the water out of your pool or spa. The pump housing will remain full of water while the pump is on, and will remain full or partially full when the pump is shut off. When powered on, the motor will begin to rotate. Two-speed pumps will power on a pre-selected speed or with some controllers, it will cycle at high before changing to the lower speed. The motor spins the pump impeller, located inside the pump volute. While the motor is rotating, the tips of the impeller are hydraulically sealed inside the pump diffuser, which is responsible for self-priming. Self-priming can only occur if the pump has a diffuser–all in ground Hayward pumps have an internal diffuser. It helps to eliminate any air approaching into the pump housing from the suction piping. As all the air is removed from the system, you will notice bubbles returning to the pool through the return fittings. A full prime occurs when the bubbles stop returning to the pool and the pump basket is full of water. The filter pressure will rise as the pump reaches full prime. The actual gallons per minute (GPM) vary with the type of pump, horsepower, pipe size, distance from pool and other restrictions within the plumbing system. Hayward self-priming pumps are very dependable and simple in design. They require a sufficient supply of water from the pool or spa, and no air in the suction lines. Air could come from a loose strainer cover, a leak in any valve, a pinhole in any suction line or a crack or loose connections in the underground piping. Do I need to have a strainer basket in my pump pot? Yes. Without the strainer basket, debris will clog the impeller in the pump volute causing the pump to cease moving water. Be sure to clean your strainer basket, as well as the skimmer baskets, so water flow is not obstructed and the pump is not overworked. How do I winterize my pump? To winterize a Hayward Pool pump, turn off the electrical circuit breaker that supplies power to the pump. Also, make sure that there is NO water left inside the pump. All Hayward pumps are equipped with drain plugs that will allow excess water to drain once the plugs are removed. Contact your local Hayward dealer for proper winterization procedures. How many hours per day should I run my pump? There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use. (View larger)
Reference Number Description Number Required Part Number Model SP2610X15 1 Hand Knob 2 SPX1600P 2 Swivel Nut 2 SPX1600N 3 Strainer Cover 1 SPX1600D 4 Strainer Cover Gasket 1 SPX1600S 5 Basket 1 SPX1600M 6 Drain Plug w/ Gasket 2 SPX1700FG 7 Pump/Strainer Housing 1 SPX1600AA 8 Diffuser Gasket 1 SPX1600R 9 Diffuser 1 SPX2600B 10 Impeller 1 SPX2610C 11 Seal Assembly 1 SPX1600Z2 12 Housing Gasket 1 SPX1600T 13 Seal Plate 1 SPX2600E5 14 Motor Mounting Plate 1 SPX1600F5 15 Housing Cap Screw 4 SPX1600Z4 16 Motor Cap Screw 4 SPX125Z4 17 Mounting Foot [includes adapter (19) and screws (18)] 1 SPX2600G1 18 Mounting Foot Cap Screw 2 SPX1600Z52 19 Mounting Foot Adapter 1 SPX2600Q 20 Slinger 1 SPX0125F 21 Motor – 60 Cycle Single Phase [includes slinger (20)] 1 SPX1610Z1M

Product Features

• Efficient, dependable circulation pump for in-ground pools of all types and sizes
• Heavy-duty, high-performance motor provides quieter, cooler operation
• Swing-away hand knobs for easy strainer cover removal; simple access to internal parts
• 110-cubic-inch basket; self-priming (suction lift up to 10-feet above water level)
• Measures approximately 21 by 7-5/8 by 10-7/8 inches

[ccw-atrib-link]

The 2x Suction PoolCleaner™ uses your existing pump and filter for power. This cleaner plugs into either your designated suction port or the skimmer. The 2x is ideal for most average sized pools. Some of the features that make 2 Wheel POOLCLEANER™ unique: SELF ADJUSTING TURBINE VANES All the POOLCLEANER™ cleaners have the patented self-adjusting turbines, which maximizes the power from the water flow. This turbine is similar to a paddle wheel with blades that are adjustable. This feature allows the POOLCLEANER™ to still move at low suction and low pressure. In addition the folding vanes of the turbine allow for the easy passage of larger debris through the cleaner. STEERING SYSTEM The 2x Suction POOLCLEANER™ has an internal programmed steering system, that causes the left wheel to periodically reverse, allowing the POOLCLEANER™ to turn and then move into another direction. For the 2x Suction POOLCLEANER™ there are five different programmed turns ranging from 90 to 450 degrees. This feature allows the POOLCLEANER™ to cover not only the deep end, but also the shallow end. The POOLCLEANER™ has no problem with uneven surfaces or strange shapes. It won’t stick in a corner, or get hung up by a main drain. ROBUST TIRE TREADS One look and you will see that the patented tire treads give the POOLCLEANER™ better climbing ability and obstacle maneuverability. The tires come with tread wear markers that show you when to replace your tires. The front tires of the POOLCLEANER™ have humps (raised treads) that allow the POOLCLEANER™ to overcome any reasonable obstacles such as the main drain and uneven surfaces. This makes the POOLCLEANER™ ideal for all pool surfaces and shapes. ADJUSTABLE SKIRT The POOLCLEANER™ has patented adjustable skirts that allow the cleaner to maintain optimal suction under the machine even when it encounters obstacles. When the POOLCLEANER™ encounters an obstacle one (or more) of the skirts will lift up (adjust) over the obstacle while maintaining suction under the cleaner. An easy way to determine if you need a 2 Wheel Suction PoolCleaner or a 4 Wheel Suction PoolCleaner is to imagine a 40 ft long pool. If the suction port or skimmer is half way (most newer pools) approx. 20 ft from one end, then the 2 Wheel Model will be sufficient. If however the suction port is all the way at one end AND you have a very deep end the 4 Wheel PoolCleaner would be better suited for your pool. The best way to describe it is that the 4 Wheel model can drag more hose. PLEASE NOTE: Special tires may be needed for certain pool surfaces such as tile, vinyl and fiberglass.

Product Features

• The 2 Wheel Suction Side Cleaner is professionally designed for a Small to Medium size Pool with a dedicated suction line and/or a skimmer application.
• The 4 Wheel Suction Side Cleaner is professionally designed for a Larger Size Pool, Diving Pool, Lap Pool, and/or older pool with no dedicated suction line, and the skimmer is the only application, which is located at either end of the pool.
• Every Pool Cleaner is made with the highest quality materials to ensure the best pool cleaning product. Vinyl pools need separate tires and they are sold Separately

[ccw-atrib-link]

Premium aluminum leaf skimmer

Product Features

• Heavy duty light and strong aluminim frame with platic safety bumper
• Light and strong aluminum frame
• Plastic safety bumper included

[ccw-atrib-link]

Doheny’s Above Ground Pumps The price is right! Doheny’s Pumps cost less than big name brands, but offers dependable performance and outstanding results for its value. Heavy-duty construction and advanced engineering provide high efficiency and minimized noise. Designed and manufactured to meet all requirements. Note: Not for use with storable pools. Doheny’s Pool Pro Pick Our Pool Pros put our products to the test so you know which products give you outstanding results and value. Tested, tried and true for high quality construction, ease of use, efficiency and reliability – shop this Doheny’s Pool Pro Pick with confidence and SAVE!

Product Features

• Dependable Performance, Corrosive Resistance, Highly Durable
• Doheny’s Pro-Pick
• Compare to Hayward PowerFlo LX
• Large, Easy-to-Clean Filter Basket
• 110v AC with 6 Foot Cord

[ccw-atrib-link]

reblogged from Youtube

cleaner will not go into a shallow end that is less then 3ft deep.

Product Features

• Vacuum inground pools regardless of size, shape, or construction
• require at least a 3/4 hp swimming pool pump or 1600ghp to function properly.
• No tools required. No need for electricity.
• Attaches to your existing filtration system. Ideal for pools up to 16′ x 32′.

[ccw-atrib-link]

This lightweight, easy-to-use, 4 foot telescopic pole with integrated leaf net is super handy for quick cleanup of pools and spas. Made from aluminum and rugged plastic, this space-saving cleaning tool is essential for smaller above ground pools or quick spot skimming any size pool. The included leaf skimmer easily detaches so you may attach an alternate telescoping pole accessory. Additional telescoping pole accessories are sold separately. The pole adjusts from 21.5 – 48 inches long with a total extended length including net of 60 inches.

Product Features

• Telescopic pool skimmer
• Adjustable aluminum handle
• Makes skimming easy
• 4-feet long

[ccw-atrib-link]